thomann STAIRVILLE PAR56 MKII RGBW, User Manual

Page: 31 / 48

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘RED’ , ‘GREE’ , ‘BLUE’ , ‘WHIT’ or
‘STRO’ . Press [OK] . Now you can adjust the brightness of the red, green, blue or white LEDs in a
range from 0 to 255, or select the flash rate in a range from 0 to 24.
This operating mode can also be used to create constant or flashing light mixed from the four
LED colours without DMX controller.
When the display shows the desired value, press
[OK] to confirm the selection and then [M] to
return to the superordinate menu. To return to the superordinate menu without changes,
press [M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘FADE’ . Press [OK] .
Now you can set the fade speed of the pre-programmed automatic shows. Use the arrow keys
to select a value between 1 and 7 (the display shows ‘F-01’ … ‘F-07’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press [OK] to confirm the selection and return to the main menu. To return to
the main menu without changes, press [M] .
Manual test
Fade speed
Operating
PAR56 MKII RGBW
31