thomann StairVille PAR56 MKII RGBA, User Manual

Page: 28 / 48

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘DMX’ . Press [OK] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use the arrow keys to select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press [OK] to confirm the selection and then [M] to
return to the superordinate menu. To return to the superordinate menu without changes,
press [M] .
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the different DMX modes.
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
DMX address
Operating
LED PAR
28