thomann Stairville Outdoor Stage PAR 12 x 3W WLA, User Manual

Page: 28 / 44

This setting is only relevant when the device is controlled via DMX.
Use
[Mode] to open the main menu. Press [Up] or [Down] repeatedly until the display shows
‘d.xxx’ . Now you can set the number of the first DMX channel to be used by the device (DMX
address). Use [Up] or [Down] to select a value between 1 and 510 (display shows
‘d.001’ … ‘d.510’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
3-channel 510
5-channel 508
7-channel 506
Confirm with [Setup] . Press [Up] or [Down] to select the desired DMX mode:
n
‘3-CH’ (three channels)
n
‘5-CH’ (five channels)
n
‘7-CH’ (seven channels)
DMX mode
Operating
28
Outdoor Stage PAR 12 × 3W WLA
LED PAR