thomann STAIRVILLE maTrixx SC-100 DMX LED Effect, User Manual

Page: 29 / 44

0: DIP switch is in ‘OFF’ position. 1: DIP switch is in ‘ON’ position.
Example: To set the DMX address 10 set DIP switches 2 and 4 to ‘ON’, all others to ‘OFF’. The
highest possible DMX address is 511 (all DIP switches to ‘ON’).
7.2 Operating mode ‘Master / Slave’
Connect the required devices in a chain. The DMX address of the first device (working as
‘master’) must be set to 001 (first DIP switch set to ‘ON’, all the others to ‘OFF’). The other
devices (which are set up as ‘slave’), may be set to any DMX address except 1.
DIP switch 10 is used to invert the auto show of the devices connected as ‘slave’. Set DIP switch
10 to ‘ON’ to enable this feature.
Operating
maTrixx SC-100 DMX LED Effect
29