In this menu, you can specify the behaviour of the device when the DMX signal is interrupted.
Press
[MENU]
repeatedly until the display shows
‘blNd’
. Use or to select the option
‘yes’
.
With this selection, both LEDs are turned off when no DMX signal is present.
or
Use or to select the option
‘no’
. With this selection, the LEDs remain on and the device
operates in master / slave mode depending on the setting.
Confirm the selection with
[ENTER]
.
In this menu, you can start a self-test.
Press
[MENU]
repeatedly until the display shows
‘teSt’
and confirm with
[ENTER]
. The self-test is
started. To stop it, press
[MENU]
.
In this menu, you can access the current device temperature.
Press
[MENU]
repeatedly until the display shows
‘teNP’
and confirm with
[ENTER]
.
Blackout
Self test
Temperature display
Operating
blinder
26
Summary of Contents for Stairville LED Par 64 COB
