thomann Stairville LED Octagon XB 432 RGBW, User Manual

Page: 29 / 48

Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘LINE’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘MA’ .
Press the [OK] button. Now you can select one of the 41 preprogrammed automatic shows.
Use the arrow keys to select a value between 1 and 42 (display shows ‘P-01’ … ‘P-42’ ).
The automatic show can only be activated on the unit, that operates as Master.
This setting is only relevant if the unit is not controlled via DMX. The device can work in stand-
alone mode or control connected devices of the same type, which must be configured as slave.
When the display shows the desired value, press the [OK] button to confirm the selection, and
then [M] to return to the parent menu. To return to the parent menu without any changes,
press the [M] button.
(For operating mode ‘Slave’ see Ä ‘Operating mode ‘Slave’’ on page 32 .)
Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘SET’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘SPEE’ .
Press the [OK] button. Now you can set the programme speed for the preprogrammed auto‐
matic shows. Select a value between 1 and 255 (display shows ‘T001’ … ‘T255’ ).
This setting is only relevant if the unit is not controlled via DMX. When the display shows the
desired value, press the [OK] button to confirm the selection, and then [M] to return to the
parent menu. To return to the parent menu without any changes, press the [M] button.
Operating mode ‘Show/Master’
Programme speed
Operating
LED Octagon XB 432 RGBW
29