thomann Stairville JunoScan MKII, User Manual

Page: 36 / 60

Activate the settings menu. Press the [MODE ESC] button repeatedly until ‘GOBO’ appears in
the first line of the display. Use the [UP] and [DOWN] buttons to select a value between 0 and
255 until the gobo wheel is in the desired starting position.
Press the
[ENTER] button to confirm your setting and to move to the next menu option. To
close the menu without saving the changes, press the [MODE ESC] button or wait one minute.
Activate the settings menu. Press the [MODE ESC] button repeatedly until ‘COLOR’ appears in
the first line of the display. Use the [UP] and [DOWN] buttons to select a value between 0 and
255 until the colour wheel is in the desired starting position.
Press the
[ENTER] button to confirm your setting and to move to the next menu option. To
close the menu without saving the changes, press the [MODE ESC] button or wait one minute.
This function is only needed for technical service and should not be used during normal opera‐
tion.
Activate the settings menu. Press the
[MODE ESC] button repeatedly until ‘LED’ appears in the
first line of the display. Use the [UP] and [DOWN] buttons to select a value between 0 and 70.
Press the [ENTER] button to confirm your setting and to move to the next menu option. To
close the menu without saving the changes, press the [MODE ESC] button or wait one minute.
Adjusting the gobo wheel
starting position
Adjusting the colour wheel
starting position
LED setting
Operation
LED scanner
36