thomann StairVille Bowl Beam 604 LED COB User Manual Download

Page: 65 / 68

Cleaning

Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the

light output. The frequency of cleaning depends on the operating environment: wet, smoky or

particularly dirty surroundings can cause more accumulation of dirt on the optics of the

device.

Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).

Always dry the parts carefully.

The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before

cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint-

free damp cloth for cleaning. Never use solvents or alcohol for cleaning.

Optical lenses

Fan grids

Cleaning

Bowl Beam 604 LED COB

Summary of Contents for StairVille Bowl Beam 604 LED COB





































































Search results

Summary of Contents for StairVille Bowl Beam 604 LED COB

Reviews:

Related manuals for StairVille Bowl Beam 604 LED COB

Brands by name

Popular brands

thomann StairVille Bowl Beam 604 LED COB, User Manual

Search results

Summary of Contents for StairVille Bowl Beam 604 LED COB

Reviews:

Related manuals for StairVille Bowl Beam 604 LED COB

Brands by name

Popular brands