Press
[Mode]
repeatedly until the display shows
‘d.xxx’
. Now you can set the number of the
first DMX channel to be used by the device (DMX address). Use the
[UP]
and
[DOWN]
buttons
to set a value between 1 and 510 (display shows
‘d.001’
…
‘d.510’
).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode
Highest possible DMX address
3-channel
510
4-channel
509
8-channel
505
Press
[Setup]
to confirm. Use the
[UP]
and
[DOWN]
buttons to select one of the following DMX
operating modes:
n
‘d-P2’
(three channels)
n
‘d-P3’
(four channels)
n
‘d-P1’
(eight channels)
DMX-Modus
Operating
Outdoor Stage PAR 12 × 3W Tri
23
