1.
Unfold the feet of the stand until the cross braces are in a horizontal position.
2.
Fix this position with the safety screw on the slider to which the three feet are attached.
3.
Put the mounting of the T truss on the extension tube and fix the T truss with the safety
screw on the extension tube.
4.
Pull out the safety pin and loosen the safety screw on the extension tube.
5.
Pull out the extension tube to the desired height and slide the safety pin through the
corresponding grid hole.
6.
Fix the position of the extension tube with the safety screw on the tube clamp.
7.
Mount a spotlight or a speaker box. If necessary, screw the optionally available adapter
to the T truss. Observe the instructions of the respective manufacturers. The maximum
load capacity of 80 kg in total must not be exceeded.
Setting up
Operating
BLS-300 HD
17
speaker / light stand