thomann Sirus Quad B 823 User Manual Download Page 39

Page: 39 / 68

Press /

[SCAN]

The display shows

‘SCAN’

and flashes.

Hold the infrared sensor of the corresponding transmitter near the infrared sensor of the

receiver.

The automatic synchronisation is carried out.

If the system does not find a frequency and a free channel within five seconds, it auto‐

matically returns to the default state.

Press /

[IR]

until the display shows

‘LOCK’

All keys except for the main switch are locked.

To unlock the keypad, press /

[IR]

until

‘LOCK’

is no longer visible.

The keys have their original function again.

Automatic search for a free

channel and automatic synchro‐

nisation

Locking or unlocking the

keypad

Operating

Quad R 823 Quad H 823 Quad B 823 Quad C 823

Summary of Contents for Sirus Quad B 823





































































Search results

Summary of Contents for Sirus Quad B 823

Reviews:

Related manuals for Sirus Quad B 823

Brands by name

Popular brands

thomann Sirus Quad B 823, User Manual

Search results

Summary of Contents for Sirus Quad B 823

Reviews:

Related manuals for Sirus Quad B 823

Brands by name

Popular brands