4
Assembly
When assembling the stand, use felt-pad floor protectors or a carpet in
order not to damage the coating of your parquet, linoleum, laminate or PVC
floor.
Open the package and make sure before assembling that the entire scope of delivery
is present, as posted here.
1
Control panel
2
Control panel holder
3
4 × slide screw
4
4 × round nut
5
26 × Allen screw
6
2 × tube
7
2 × standing column
8
Motor holder
9
4 × adhesive cable tie
10
Motor
11
2 × cable of the standing column
12
Cable of the control panel
13
2 × foot
14
Power cable
15
2 × crossbar
16
4 × adhesive foam pad
17
2 × angle piece
18
2 × Allen key
1.
Set up the stand near a power wall outlet.
2.
Proceed according to the illustrations and only use the supplied screws. Using
other screws could result in a reduced stability of the stand.
Assembly
electric height-adjustable stand
10