thomann Quadro 500 DSP, User Manual

Page: 11 / 36

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or fire.
NOTICE!
Magnetic fields
The device generates strong magnetic fields that can interfere with the function of poorly shielded devices. The strongest magnetic
fields are directly above and below the power amplifier. Therefore, never place sensitive devices such as pre-amplifiers, radio trans‐
mission systems, or tape decks directly above or below the power amplifier. When installing the power amplifier into a rack, you
should place it in the lowest position, and further equipment such as pre-amplifiers in the highest position.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate
or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but
use felt-pad floor protectors or a carpet.
Safety instructions
Quadro 500 DSP
11