5. Panel reference: System functions
NORD ELECTRO 2 V2.0x
Page 36
P
P
P
P
E
E
E
ED
D
D
D
. P
. P
. P
. P
O
O
O
OL
L
L
L
Press the
S
HIFT
+
P
ROGRAM
7
(PED.POL) buttons to set
up the Sustain Pedal and Rotor Speed Pedal polarity.
Change pedal polarity between ‘OP’ (Open) (open when
pressed) and ‘CL’ (Closed) (closed when pressed) with the
U
P
/D
OWN
N
AVIGATOR
buttons. Press any button (except
for the
S
HIFT
, S
TORE
or
U
P
/D
OWN
buttons) to exit.
Nord Electro 2 sends and receives Sustain Pedal messages as
MIDI CC# 64 and Rotor Speed Pedal messages as MIDI
CC#82.
C
C
C
C
O
O
O
ON
N
N
NF
F
F
FIIIIG
G
G
G
Press the
S
HIFT
+
P
ROGRAM
8
(CONFIG) buttons once to
enter the
P
edal Configuration function. Here you select
how you want to configure the
S
USTAIN
P
EDAL
input.
There are two options:
1. If you’re using a single sustain pedal in the
S
USTAIN
P
EDAL
input you may want to use it for sustain with
Piano sounds and as a Rotor Speed switch with Organ
sounds. In this case, select ‘P.t’ (
P
edal
t
oggle) with the
U
P
/D
OWN
N
AVIGATOR
buttons. Press any button
(except for the
S
HIFT
, S
TORE
or
U
P
/D
OWN
buttons) to
exit.
2. If you’re using two separate sustain pedals: one in the Sustain Pedal Input and one in the Rotor
Speed Input you probably want to use the sustain pedal in the
S
USTAIN
P
EDAL
input
for sustain also
with Organ sounds. In this case, select ‘P.S’ (
P
edal
S
ustain) with the
U
P
/D
OWN
N
AVIGATOR
but-
tons. Exit by pressing any button (except for the
S
HIFT
button).
Note: It’s possible to use this configuration also if you’re only using a single sustain pedal in the
Sustain Pedal input. In that case you’ll have to control the Rotor Speed from the front panel.
Nord Electro 2 sends and receives Sustain Pedal messages as MIDI (CC# 64).
Note! If you have selected
‘P.t’, Rotor Speed selection is sent from the sustain pedal as MIDI CC#82 - not CC#64!
