thomann millenium, User Manual

Page: 16 / 56

Press the [LOOP] button to activate the loop mode. At that, the left point of the three-digit LED
display lights up.
This unit offers you 100 built-in drum loops in total to choose from.
1. Turn the [DIAL/ENTER] , control to select a suitable loop (001
…
100).
ð
The current ‘Loop number’ flashes in the LED display, but the sound is still
unchanged.
2.
Now push on the [DIAL/ENTER] , control to confirm the loop selection.
ð
Now the sound changes and the ‘Loop number’ stops flashing.
3.
Press the [LOOP] button again to proceed to the loop volume control mode (Display:
…
). Turn the [DIAL/ENTER] knob to select a suitable volume level.
Press the [LOOP] button again to toggle between both modes.
Press the
[DIAL/ENTER]
button to save the current setting.
Selecting a loop
The functions of the device
hand-drum pad
16