4
Installation and starting up
Rack setup and assembly of the pads and pedals are described in detail in the
enclosed set assembly guide. Finally check that all cables between the pads and the
drum module have been properly connected.
Connect the supplied D-sub plug of the pad connector cable to the D-sub input
socket on the rear panel of the drum module.
Connect the included power supply unit to the
[DC IN]
input on the rear panel of the
drum module and then put the power plug into the power outlet.
Connect your computer to the USB midi port on the rear panel of the drum module.
Connect the inputs of your amplifier or active monitor to the output sockets
[LINE OUT]
on the rear panel of the drum module. Connect a CD or MP3 player etc. to
the
[LINE IN]
input socket on the rear panel of the drum module.
Rack setup, connecting pads and
pedals
Connecting the pads
Connecting the power adapter
12V
DC IN
Connecting USB devices
Connecting audio devices
Installation and starting up
e-drum module
8
