7
Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Up]
and
[Down]
to
change the respectively indicated value. When the display shows the desired value press
[Mode]
.
If you don't press any button for about 20 seconds, the current setting will be automatically
applied and the display turns off. The set values are retained as long as the device is connected
to the mains power supply.
Operating
LED Bar 240/8 CW/WW DMX
31
Summary of Contents for LED Bar 240/8 CW/WW DMX
