Press
[MENU]
. Press one of the arrow buttons repeatedly until the display shows
‘DMX Address’
.
Press
[ENTER]
. Now you can set the number of the first DMX channel to be used by the device
(DMX address). Use the arrow buttons to select a value between 1 and 512 (display shows
‘001’
…
‘512’
). When the display shows the desired value press
[ENTER]
to confirm the selection.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the respective highest possible DMX address for the various DMX modes.
Mode
Highest possible DMX address
1-channel mode
512
2-channel mode
511
4-channel mode
509
Press
[MENU]
. Press one of the arrow buttons repeatedly until the display shows
‘DMX Mode’
.
Press
[ENTER]
. Now you can set the DMX mode. Use the arrow buttons to choose between 1-
channel mode, 2-channel mode and 4-channel mode (display shows
‘1CH’
,
‘2CH’
or
‘4CH’
).
When the display shows the desired value press
[ENTER]
to confirm the selection.
Make sure that this number matches the configuration of your DMX controller.
DMX address
DMX mode
Operating
30
Pure UV 710
LED PAR
Summary of Contents for Ignition Pure UV 710
