Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 478776_28.04.2021
Wireless Plug & Play
Technical specifications
Receiver
Power supply
Micro USB
Output connection
XLR plug
Frequency of operation
5.729 GHz ... 5.820 GHz
Battery
Type
Lithium ions battery
Voltage
3.7 V
Capacity
360 mAh
Operating time
4 h
Charging time
2 h
Delay 5.6 ms
Dimensions (W × H × D) 30.5 mm × 30.5 mm × 98 mm
Weight 0.06 kg
Colour White
Ambient conditions
Temperature range
0 °C ... 40 °C
Relative humidity
20 % ... 80 %
(non-condensing)
EN
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these mate-
rials with your normal household waste, but make sure that they are collected for
recycling. Please follow the notes and markings on the packaging.
Batteries must not be thrown away or incinerated; they must be disposed of in
accordance with local regulations for the disposal of hazardous waste. Use the
existing collection points for this.
Dispose lithium batteries only in discharged condition. Remove replaceable
lithium batteries from the device before disposal. Protect used lithium batte-
ries from short circuits, for example by covering the poles with adhesive tape.
Permanently installed lithium batteries must be disposed of together with the
device. Please inquire about a suitable acceptance point.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal firm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your
local waste disposal facility.
Transmitter
Power supply
Micro USB
Input connection
XLR socket
Frequency of operation
5.729 GHz ... 5.820 GHz
Max. transmission power
>7 dBm
Range (free field)
approx. 35 m
Battery
Type
Lithium ions battery
Voltage
3.7 V
Capacity
450 mAh
Operating time
4 h
Charging time
2 h
Delay 5.6 ms
Dimensions (W × H × D) 30.5 mm × 30.5 mm × 98 mm
Weight 0.06 kg
Colour Black
Ambient conditions
Temperature range
0 °C ... 40 °C
Relative humidity
20 % ... 80 %
(non-condensing)
Using the device
1. Press and hold the On / Off buttons on both devices until they are switched
on.
2. If the orange indicator flashes, the devices must first be paired. To do this,
press and hold the ID buttons on both devices for 5
-
7 seconds. The two ID
channel indicators should then light up in the same colour and the orange in-
dicator should go out. The pairing is now complete and the devices are ready
for use.
3. If the pairing did not work, switch the transmitter (black) off with the On / Off
button and then on again. Do step 2 again.
4. After the connection has been made, coWWnnect the transmitter (black) to
the XLR connector of a microphone. Connect the receiver (white) to the input
of an amplifier or mixer.
5. If noise interference occurs during the transmission, press the ID button on the
transmitter to switch to another communication channel. The receiver then
also carries out the same step automatically.
Understanding the indicators
Indicator
Meaning
Charge indicator lights
Charge level > 30 %
Charge indicator slowly flashing
Charge level < 30 %
Charge indicator quickly flashing
Charge level < 10 %
Charge indicator flashes every 5 seconds
Charge level < 5 %
Indicator
Meaning
Pairing indicator flashing
Pairing underway
Pairing indicator off
Pairing complete
Charge indicator breathes green
Charging underway
Charge indicator lights green
Charging complete
Amp
Mic
Transmitter
Receiver
