thomann free solo PT, User Manual

Page: 37 / 52

If you don't want to synchronise the transmitter via the infrared interface with the receiver, you
can also set the transmission frequency manually.
1.
Press [SET] repeatedly until the value in the GP field of the display is flashing.
2.
Use the arrow keys to select the frequency group.
Press
[SET] to confirm the selection.
ð
The figure in the CH field is flashing.
3.
Use the arrow keys to select a channel within the set frequency group.
If you have selected the frequency group ‘U’, you can directly set the frequency using
the arrow keys. First, set the value to the left of the decimal point, then press [SET] and
after that set the value to the right of the decimal point.
Press
[SET] to confirm the selection.
ð
After a few seconds the display will return to the default state.
Frequency selecting
Operating
free solo PT
37