thomann column HT, User Manual

Page: 44 / 76

1.
Press [SET] .
ð
The main menu opens up.
2. Use the arrow buttons to select the submenu ‘Freq. preset’ .
Press [SET] to confirm the selection.
ð
The ‘CH xxx’ display appears.
3.
Use the arrow buttons to select a channel between 1 and 90. The bottom line of the dis‐
play shows the corresponding frequency.
Select channel U to enter the frequency directly.
Press
[SET] to confirm the selection.
ð
The display shows that the receiver is being adjusted to the new frequency. After a
few seconds, the display shows the normal sate again.
4.
Press the main switch to close the menu.
Select channel
Operating
UHF wireless system
44