1.
Select
‘ArtNet-Config’
to set up the network connections.
2.
In
‘Sub-Mask ’
, select one of the three addresses.
3.
In
‘Local IP’
, enter the local IP address
‘192.168.1.10’
.
4.
In
‘Net Switch’
, enter a value between
‘0’
and
‘127’
for the upper 7 bits of the 15-bit
address in the ArtDMX.
5.
In
‘Sub Switch’
, enter a value between
‘0’
and
‘15’
for the middle 4 bits of the 15-bit
address in the ArtDMX.
6.
In
‘SwOut’
, enter a value between
‘0’
and
‘15’
for the lower 4 bits of the 15-bit address
of the output in the ArtDMX.
7.
In
‘SwIn’
, enter a value between
‘0’
and
‘15’
for the lower 4 bits of the 15-bit address of
the input in the ArtDMX.
8.
In
‘Broadcast’
, in Input mode, select the option
‘Broadcast’
or
‘Unicast’
.
9.
In
‘Target IP’
under
‘All’
, enter an IP destination address uniformly for all 8 interfaces, or
under
‘IP1’
…
‘IP8’
, enter a separate IP destination address for each interface. The first
byte of the IP address is not displayed.
Configuring ArtNet
Operating
24
NETcon 8-3 / 8-5
ArtNet DMX converter
Summary of Contents for Botex NETcon 8-3
