thomann 8, User Manual

Page: 38 / 52

1.
Keep the [Program | Record] button pressed for three seconds to change to program‐
ming mode.
ð
The indicator LED [Program | Record] lights up.
2. Press [Mode] .
ð
The indicator LEDs [Mode] and [Chase] light up.
3.
Use the buttons and to select the chaser you want to delete a step from ( ‘CS.01’ …
‘CS.16’ ).
4. Press [Patch | Insert] .
ð
The indicator LED [Patch | Insert] flashes.
5.
Use the buttons and to select the desired step ( ‘sT01’ … ‘sT99’ ).
6. Press the [Del] button to delete the step.
ð
All indicator LEDs flash three times briefly when the step has been deleted.
7. Repeat steps 4 and 6 to delete further steps.
8. Keep the [Program | Record] button pressed for three seconds to quit the programming
mode.
Deleting steps from a chaser
Operating
DMX-controller
38