thomann 497726, User Manual

Page: 16 / 32

1 [INPUT]
Preamp volume control. If the [CLIP] LED lights up red, this controller must be turned counter-clockwise until the LED
turns green again. If some EQ band levels have been changed, re-adjusting the [ INPUT] control may be necessary.
2 [CLIP]
The LED lights up green when the device is turned on. It lights up red when the signal is clipping. Then turn the
[INPUT] control counter-clockwise until the LED turns green again.
3 [BASS] / [LO MID] / [MIDDLE] / [HI MID] / [TREBLE]
Controls for raising or attenuating the bass / lower mids / mids / upper mids / treble
4 [OUTPUT]
Master volume control
5
3.5 mm jack output to connect head phones
6
3.5 mm jack input for connecting a line level player, e.g. MP3 player or mobile phone
Connections and operating elements
bass head
16