thomann 490457, User Manual

Page: 45 / 64

7.5 Operating mode Dimmer
Dimmer operation can only be activated when the unit is operating in stand alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
1.
Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Colr’ . All LEDs light up
with full intensity.
2.
Confirm the selection with [Setup] .
3.
Use [Up] | [Down] to successively adjust the intensity of the four basic colours as
required.
n
Red: ‘r.000’ … ‘r.255’
n
Green: ‘g.000’ … ‘g.255’
n
Blue: ‘b.000’ … ‘b.255’
n
White: ‘u.000’ … ‘u.255’
Operating
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
45