thomann 278617, User Manual, Page: 26 / 48

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK] . Press
one of the arrow keys repeatedly until the display shows ‘MODE’ . Press [OK] . Now use the
arrow keys to select one of the following DMX operating modes:
n
‘4CH’ (four channels)
n
‘6CH’ (six channels)
n ‘8CH’ (eight channels)
This setting is only relevant if the device is controlled via DMX. When the display shows the
desired value, press [OK] to confirm the selection. Then press [M] to return to the superordinate
menu. To return to the superordinate menu without changes, press [M] .
DMX mode
Operation
LED PAR
26