LOREM
T H M
C L A V I C U L A S E
16
INSTALL
Preparing the Frame
It is imperative you read and observe the safety and assembly information provided
by the manufacturer of your frame.
Secure your bicycle in an appropriate assembly stand.
If necessary remove the crankset and the old
bottom bracket.
If necessary use cleaning solvent or other similar
agents to clean the bottom bracket housing of your
frame.
Make sure that the edges of the bottom bracket
housing are plane, parallel, milled to the correct
dimension and free of burrs
–
page 11.
If necessary rework the bottom bracket housing
using an appropriate milling tool (Cyclus, ParkTool®
or other similar tool).
Make sure that the threads of the bottom
bracket housing are clean, free from paint
residues and adequately tapped into the
housing.
If necessary, rework the threads with an appropriate
cutting tool (Cyclus, ParkTool® or other similar tool).
INFO