OUT
AUX
IN
IN
IN
AUX3
AUX2
AUX1
8
Ω
70V
100V
0V
GND
TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK
EQUIPMENT TO RAIN OR
MOISTURE.
FM ANTENA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DON’T EXPOSE THIS
1. FM ANTENNA TERMINALS
The FM terminal accepts a 75 Ohm Coaxial cable that
terminates at an FM antenna. Antenna position may
affect performance so it may be necessary to
reposition the antenna for the best reception.
Note: The ability to receive an FM signal may be
diminished by terrain, area buildings, and the
construction materials of the building housing the
receiver. Keep these circumstances in mind when
selecting the type of FM antenna and its mounting
position.
An indoor FM antenna is provided and should be
suitable for most applications. Repositioning the
antenna may be necessary to identify the optimum
mounting location. If greater signal strength is required,
replace the supplied antenna with a large outdoor FM
antenna using 75 Ohm coax as the lead wire.
2
.
AUX1 INPUT PORT
Stereo RCA unbalanced input port for AUX1.
3
.
AUX2 INPUT PORT
Stereo RCA unbalanced input port for AUX2.
4
.
AUX3 INPUT PORT
Stereo RCA unbalanced input port for AUX3.
5
.
AUX OUTPUT PORT
Stereo RCA unbalanced output port for external
amplifier or recording device.
6
.
8
Ω
SPEAKER
OUTPUT
TERMINAL
Connect to the
"+"
of
8ohms low impendence speaker
.
7
.
8
Ω
SPEAKER
OUTPUT
TERMINAL
Connect to the
"-"
of
8ohms low impendence speaker
.
8
.
70V SPEAKER OUTPUT TERMINAL
Connect to the
"+"
of
70V high impendence speaker
.
9
.
100V
/
70V SPEAKER OUTPUT TERMINAL ”0V”
Connect
to
the
"-"
of
100V
/
70V
high
impendence
speaker.
10
.
100V SPEAKER OUTPUT TERMINAL
Connect to the
"+"
of
100V high impendence
speaker
.
11
.
AC POWER CORD
Connect only to an proper AC mains power source.
12
.
AC FUSE HOLDER
The fuse holder contains the AC overload
protection fuse. If the fuse has blown out, replace
it with a fuse of the same specifications. If the fuse
continues to blow, refer servicing to a qualified
service technician.
13. FAN VENTS
These vents provide hot air flow out of the unit.
It is important to keep them free of obstructions,
to prevent the unit from overheating. It is also
important to operate the unit in a dust-free
environment.
Rear
Panel
Page 5
MP3
/
Tuner/BT Mixer Power Amplifier
