Firing next staple or nail , repeat step 3
The trigger must be keep squeezing all the time during the safety contact pin is being depressed time
by time
Do not keep the trigger depressed when the tool is not in use, to prevent accidental firing when the
tool is not in use.
A significantly reduced working period after charging indicated that the battery is used and must be
replaced.
Depth Adjustment Wheel
Depth adjustment helps protect work surface and allows proper setting of nail heads
Turn the depth adjustment wheel towards to figure 1, the nail/staple will be fired into wood much more
depth ;
Turn the wheel towards to figure 2, the nail/staple will be fired into wood in less depth.
Figure 1 Figure 2
Removing a jammed nail or staple
Note: You must remove any jammed nail/staple before using the tool any further. Otherwise, it could
cause damage to the mechanism.
Remove the battery pack from the tool.
Open the magazine, remove the staples or nails in channel. Then, to remove the jammed fasteners.
Removing a jammed nail or staple
Note: You must remove any jammed nail/staple before using the tool any further. Otherwise, it could
cause damage to the mechanism.
Remove the battery pack from the tool.
Open the magazine, remove the staples or nails in channel. Then, to remove the jammed fasteners.
06
