Settings
45
6.3.8 Setting the battery cutoff voltage feature
You can set the voltage limit to stop recording at when using the Low Voltage Off feature. Refer to the
following instructions to set the voltage.
• The battery cutoff voltage can be set only when the
Battery Protection
setting is set to
Enabled
.
• If the Off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
1
From the mobile viewer, tap
Dash Cam Settings
>
Record Settings
.
2
From
12V
or
24V
, select the desired voltage.
For vehicles using a 12 V battery (most passenger vehicles), configure the
12V
setting. For vehicles
using the 24 V battery (trucks and commercial vehicles), adjust the
24V
setting. The new setting is
applied automatically.
6.3.9 Setting the battery protection feature for wintertime
You can set the month(s) during the cold season to apply the low voltage protection level of the vehicle.
Refer to the following instructions to set the month(s).
1
From the mobile viewer, tap
Dash Cam Settings
>
Record Settings
.
2
From
Wintertime Battery Protection
, select the month(s) to apply the battery protection feature. The
new setting is applied automatically.
6.4 Setting road safety features
You can activate or deactivate a safety camera alert system, a lane departure warning system (LDWS),
a forward collision warning system (FCWS), a low speed Forward collision warning system (low speed
FCWS), and a front vehicle departure warning (FVDW) and set their options.
6.4.1 Setting the safety cameras
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
From the mobile viewer, tap
Dash Cam Settings
>
Road Safety Settings
.
2
From
Safety Cameras
, select
Enabled
or
Disabled
. The new setting is applied automatically.
