COT150-AWF01 Spec1.0
www.cjtouch.com
- 8 -
1.4.1 Touch Monitor Mounting guide
1. Build 4 screw studs along the two sides of the cut out opening based on the dimension given on
the drawing above.
2.Thghten the screw stud with hex nut and make sure it is stable.
1.4.3 Exploded Diagram
1.5 Electrical Block Diagram
The LCD touch monitor is constructed based on steel open frame architecture. It consists of a 15”
LCD panel, an DC to AC inverter board to support a set of cold cathode fluorescent light, an
analog to digital converter board (AD Board) to convert analog RGB signals to digital ones, and a
