ThinkPad Z61e, Hardware Maintenance Manual

Page: 45 / 158

Indicator Meaning
10
Standby status Green:
The computer is in standby mode.
Blinking green:
The computer is entering standby mode or hibernation
mode, or is resuming normal operation.
11
Ultrabay
Enhanced status
Green:
An Ultrabay Enhanced device is installed and in use.
Blinking green:
An Ultrabay Enhanced device is in the process of being
detached.
Turn off:
An Ultrabay Enhanced device is ready to be attached or
detached.
Note: If you are using Windows 2000, the Ultrabay Enhanced
status indicator does not blink while an Ultrabay Enhanced
device is being detached. Instead, a message box pops up when
the process is completed; then the indicator turns off.
FRU tests
The following table shows the test for each FRU.
FRU Applicable test
System board 1. Diagnostics --> CPU/Coprocessor
2. Diagnostics --> Systemboard
3. If the docking station or the port replicator is attached to the
ThinkPad computer, undock it. Place the computer on a
horizontal surface, and run Diagnostics --> ThinkPad Devices
--> HDD Active Protection Test .
Note:
Do not apply any physical shock to the computer while
the test is running.
Power Diagnostics --> ThinkPad Devices --> AC Adapter , Battery 1 (
Battery 2)
LCD unit 1. Diagnostics --> Video Adapter
2. Interactive Tests --> Video
Modem daughter card
(MDC-1.5)
1. Make sure the modem is set up correctly.
2. Replace the modem jack and the modem card in turn, and run
the following tests in Diagnostics --> Communication :
a. Conexant Smart Modem Interrupt
b. Conexant Smart Modem Dialtone
Audio
1. Interactive Tests
-->
Internal Speaker
2. Enter the BIOS Setup Utility and change Serial ATA (SATA)
setting to
Compatibility
, and run
Diagnostics
-->
Other
Devices --> Analog Devices HDA CODEC Test
Speaker Interactive Tests --> Internal Speaker
(continued)
Product overview
ThinkPad Z61e, Z61m, and Z61p
39