ThinkPad X100e, Hardware Maintenance Manual

Page: 52 / 134

Table 7. Fn key combinations (continued)
Key combination Description
• External monitor only
Note: To switch between the computer display and an external monitor, the Win+P key
combination is also available.
For Windows XP:
Switch between the computer display and an external monitor. If an external monitor is
attached, computer output is displayed in the following three patterns by turns:
• External monitor (CRT display)
• Computer display and external monitor (LCD + CRT display)
• Computer display (LCD)
Notes:
This function is not supported if different desktop images are displayed on the computer
display and the external monitor (the Extend desktop function).
This function does not work while a DVD movie or a video clip is playing.
To enable this function, start Presentation Director, and change the settings.
Note: Multiple users can log on to a single operating system by using different user IDs. Each
user needs to do the following: Click Start
➙
All Programs
➙
ThinkVantage
➙
Presentation
Director , and change the Fn+F7 settings.
Fn+F8 Change the settings of the UltraNav
®
pointing device.
Fn+F9 Multimedia control.
Fn+F10 Multimedia control.
Fn+F11 Multimedia control.
Fn+F12 Put the computer into hibernation mode. To return to normal operation, press the power
button for less than four seconds.
Notes:
To use this combination of the keys, ThinkPad PM device driver must have been installed
on the computer.
Though the screen fades out immediately after Fn+F12 are pressed, the computer
does not enter the hibernation mode immediately. Do not move the system until the
sleep (standby) status indicator stops blinking. Moving the computer when it is entering
hibernation might cause corruption of the hard disk drive.
Fn+Delete The computer display becomes dimmer.
The purpose of this method is to change the brightness level temporarily. To change the
default brightness level, change the settings of the Power Option in the Control Panel or
use the Power Manager.
Fn+End Select a power plan (in Windows XP, power scheme) that has been created by Power Manager
or adjust the power level by using the slider control. When you press this combination of keys,
a panel for selecting a power plan (in Windows XP, power scheme) or adjusting the power
level appears.
Note: If you logged on with an administrator user ID in Windows XP, and you press Fn+End,
the panel for selecting a power scheme appears. If you have logged on with another user ID in
Windows XP, and you press Fn+End, the panel does not appear.
Fn+Esc Mute the speaker.
46
Hardware Maintenance Manual