Page 7
TLX24 Matrix Switch Product Manual
thinklogical
Rev. C, August, 2016
DESIGN FEATURES
Each
TLX24
includes the following features:
Either 24 fiber, 24 CATx or 12 fiber & 12 CATx ports - In and Out, non-blocking matrix switching
Each connection supports 10Gbps / 6.25 Gbps with re-clocking input
Power Supply Module with over-current, over-voltage and over-temperature protection
Single-mode, multi-mode fiber and BNC coaxial capability
Comprehensive system setup and control via Thinklogi
cal’s Configurator software (optional)
Multicasting and macros supported
SNMP control protocol
Controllable via LAN or serial connection
Desktop or Rack Mount
You may choose to place your
TLX24 Chassis
on or under a shelf or desktop (rubber feet included,
under-desk mounting brackets, Kit ENCA000797, available), or rack mount it using the supplied EIA 19
”
mounting brackets. In any mounting configuration, the front panel should be visible and unobstructed so
that the navigation buttons and LCD display are accessible. All connections are made on the rear of the
chassis. The TLX24 chassis does not need to be opened or accessed. The sturdy metal case allows
units to be stacked as needed
(maximum of four units per stack, with a minimum of two inches of
clearance between stacks for adequate ventilation)
.
The Front Panel
TLX24 FRONT PANEL
LCD & Navigation Buttons
Button Panel
LCD & Navigation Buttons
The LCD and Navigation Buttons are used to view and modify System and Network settings, assign IP
addresses, monitor the temperature and fans, and to reboot or power down the unit. The TLX24 front-
panel LCD should be visible and accessible for system setup.
