9
TLX48 Matrix Switch Product Manual
thinklogical
Rev. B, April, 2016
A Secondary Control Card ensures uninterrupted functionality if the Primary Control Card should
fail or need to be replaced.
The Primary Control Card should always be in the left controller slot.
The
Secondary Control Card (sometimes referred to as a Back-up or Fail-Over Control Card) must have a LAN
connection that allows it to communicate with both the Primary Control Card and the Configurator server
(required in order for the Secondary Control Card to take control of the TLX48). Both Control Cards must
have the same CPU Module/Processor. (Also see
Safely Remove an Active Control Card or Shut Down
of the System
on page 23 for more on Primary and Secondary Control Cards.)
THE PROCESSOR
– i.MX 6 QUAD (Freescale)
The Processor platform key features:
ARM Cortex-A9 MPCore 4 x CPU
Memory Interfaces
64-Bit DDR3-1066
SD (Memory Card Specification, v3.0 including high-capacity SDHC cards up to 32 GB.
Serial NAND Flash (SPI)
SATA II, 3.0 Gbps HDD
EIM Bus (FPGA Parallel Bus I/F)
HDMI 1.4 port
USB 2.0 Host (2 ports)
UART (4 ports)
Gigabit Ethernet Controller (RGMII)
GPIO (32 bits)
I2C Masters (3 ports)
Internal 100 Megabit Ethernet Interface for Controller to Controller communications
