®
3 G S D I t o H D M I C o n v e r t e r M a n u a l , R e v . D , A p r i l , 2 0 1 3
P a g e 1 1
The RS-232 setup and configuration is as follows:
Use Hyperterm or similar type interface.
Baud rate is 115200, 8 bits, no parity, 1 stop bit, no flow control
Emulate VT-100 mode
MAIN USER MENU:
A:
Set Input Select
B:
Set Output Select
C:
Video Processing Setup
D:
Audio Info and Setup
E:
User Config Setups
F:
System Settings
G:
System Information
MAIN MENU:
A:
Set Input Select
Note
:
A valid input must be applied in order for the configuration to be used.
a:
Single Link Input
This option forces a re-configure of the unit. A valid signal needs to be present.
b:
Enable Loop Output
This will enable the video signal applied to input 1 to be looped back out of the IEX3.
This is enabled as default.
c:
Disable Loop Output
Turns off the BNC Loop output 1.
d:
AUTO mode ON
Detects when a video source has changed format. On cable insertion, the unit performs
a re-configuration of the last known output setting with the new input.
e:
AUTO Mode OFF
Turns off the AUTO mode.
MAIN MENU:
B:
Set Output Select
Sets the output video resolution. A valid input video signal needs to be present.
a:
480p @ 60
b:
576p @ 50
c:
720p @ 50
d:
720p @ 60
e:
1080p @ 50
f:
1080p @ 60 (default)
MAIN MENU:
C:
Video Processing Setup
a:
Comp. Artifact Reducer
Selects menu for Component Artifact Reducer (CAR) video processing functions.
