Revision A
June 2009
8
Front Panel Display and Buttons
The front-panel LCD display should be visible and accessible for system setup. The front panel
buttons are used to configure the unit and to review existing PDU 4/4 configurations. More
detailed information on the Front Panel can be found in the section,
Front Panel View
.
enter
VIS-
RGB/
PDU 4/4
LCD System Information
and Programming
LCD Navigation Pad
PDU 4/4 Front Panel
Remote Power Distribution Unit
Figure 2:
PDU 4/4 Front Panel LCD Display
Convection Cooled
The PDU 4/4 does not require special cooling or ventilation other than what is normally provided in
the equipment rack. No fan means that it does not add to the ambient noise in your equipment
room and it is less prone to equipment failure. Be sure not to block the air vents on the sides of
the unit, and leave space on both sides. If mounted in an enclosed rack, it is recommended that
the rack have a ventilation fan to provide adequate airflow through the unit(s).
Front Panel View
enter
The Future of Access and Control
Remote Power Distribution Unit
Figure 3
: PDU 4/4 Front Panel
Use the Up and Down arrow keys to scroll through the Main Menus (Port Power, System). Once
the main menu choice is shown on the display, press the Enter key. Then, use the Left and Right
arrow keys to navigate through the menu options.
enter
VIS-
Summary of Contents for PDU 4/4
Page 2: ......
