Extend Distribute Innovate
REVISION C
6
MARCH 2011
2.2. Product Overview
2.2.1. Desktop Device
You may choose to place the chassis on a shelf or desktop (rubber feet included). The front panel
should be visible and front panel buttons should be accessible. All connections are made to the rear of
the chassis. The OriginKVM 41 chassis does not need to be opened or accessed. The sturdy metal
case allows units to be stacked, as required.
NOTE: Be sure to leave adequate ventilation space on both sides of the units
(2” minimum), especially if units are being stacked
.
2.2.2. Convection Cooled
The OriginKVM 41 does not require special cooling or ventilation. No fans means that it will not add to
the ambient noise in your equipment room and it is less prone to equipment failure. Be sure not to block
the air vents on the sides of the unit. Leave
a minimum of 2” clearance on both sides.
3. Connecting the OriginKVM 41
All physical connections to the product use industry-standard connectors. All connections are found on
the rear panel of the unit.
3.1 Front Panel View: LED Indicators
Power
LED on (green)
Power is connected and supplied to OriginKVM 41.
LED off
Power is not connected and/or not supplied to OriginKVM 41.
Console
1
LED on (green)
Port 1 of the USB hub is powered and operational.
LED off
Port 1 of the USB hub is not functional.
2
LED on (green)
Port 2 of the USB hub is powered and operational.
LED off
Port 2 of the USB hub is not functional.
3
LED on (green)
Port 3 of the USB hub is powered and operational.
LED off
Port 3 of the USB hub is not functional.
4
LED on (green)
Port 4 of the USB hub is powered and operational.
LED off
Port 4 of the USB hub is not functional.
CPU 1-4
SEL
LED on (green)
Channel is selected.
USB
LED on (green)
USB is connected properly and power is supplied.
HDMI
LED on (green)
HDMI is connected properly and power is supplied.
IR
ACT
LED on (green)
IR Receiver is communicating/receiving data from the remote.
Summary of Contents for OriginKVM 41
Page 4: ......