SAFE
TY PREC
A
UTION
INITIAL USE
S
TA
R
T CALIBR
A
TION
TA
R
GET
PA
TTERN KIT
P
R
ODUCT P
R
OFILE
14
Warning:
Batteries can deteriorate, leak or explode, and can cause injury or fire.
1. Do not shorten the battery terminals.
2. Do not charge Alkaline batteries.
3. Do not mix old and new batteries.
4. Do not dispose of batteries into household waste.
5. Do not dispose batteries in fire.
6. Defective or dead batteries must be disposed according to local regulations.
7. Keep the batteries out of reach from children.
If the laser level will not be used for a long period, remove the batteries from the battery
compartment. This will prevent batteries from leaking and corrosion damage.
Technical parameters:
Laser beams output pattern
• Horizontal and forward vertical cross beams
• Horizontal, forward and backward vertical beams
• Horizontal and 4 orthogonal vertical beams
Plumb down dot appears while vertical beam is ON
• Horizontal beam
Laser range
• Indoor - 30m (100ft)
• Outdoor with detector 60m (200ft)
Accuracy
Accuracy (plumb Dot)
±0.2mm/m (±0.0002in/in)
±1mm/1.2m
Fan angle
120°±5°
Self-leveling Range
±2.5°
Laser line width
2 mm±0.5mm/5m
(0.10” ±0.02” at 20’ )
Wavelength
520 ±10nm - Laser Class II
Power supply
Li-Polymer battery pack or
4 AA Alkaline batteries (not included)
Battery life
2.5 hours continuous operation with Li-Polymer
5 hours with 4AA Alkaline batteries
Operating temp.
-10° C + 45° C (14°F +113°F)
Storage temp.
-20° C +60° C ( -4°F +140°F)
Water & dust proof
IP54
Dimensions
ø150mmx195mm (ø 6” x8”)
Weight without batteries
1250gr ±10gr (2.75lbs± 0.35±oz )
THINKCAR ADAS Calibration Tool
