6. ALARM SETTING
8
6.1 Setting the Daily Alarm
Note: After 20 seconds without pressing any button, the clock switches automatically from
Set Mode to Normal Time Mode.
Pressing the
MODE
button once will change the display from showing the time to showing
the alarm time.
Proceed as follows to set the alarms:
●
Press the
MODE
button once to show the alarm time then press and hold down the
MODE
button for 2 seconds until the alarm time hour display starts to flash.
●
Press the
▲
and
▼
keys to to set the correct hour. Press
MODE
to confirm the settings.
●
The minute display will start to flash. Press the
▲
and
▼
keys to to set the correct
minute. Press
MODE
to confirm the settings.
●
The Snooze time of the alarm will start to flash. Press the
▲
and
▼
keys to to set the
correct snooze time.
●
Press
MODE
to confirm the settings and end the alarm setting procedure.
6.2 Activating and Deactivating the Alarm
●
Press the
▲ button once
activate the alarm. The icon will show on the display when
the alarm is active.
●
Press the
▲ button again
to deactivate the alarm. The icon will no longer be shown on
the display.
6.3 Alarm Information
●
Press any button except the
SNOOZE/LIGHT
button to deactivate the alarm when it
sounds.
●
If not manually stopped the alarm will sound for 2 minutes before automatically
stopping.
●
Once the alarm has been stopped it does not need resetting as it will automatically
sound 24 hours later at the set time.
●
Rising Alarm (length: 2 minutes) changes the volume four times whilst the alarm signal is
heard.
6.4 Automatic Snooze Function
Proceed as follows to activate the automatic snooze function:
●
While the alarm is sounding, press the
SNOOZE/LIGHT
button to activate the snooze
function.
●
This moves the alarm back by by the set time and the alarm will restart at this time.
●
The snooze function can be interrupted by pressing any button.
