1.3 Speed Master Off Road Car Battery Installation
●
Turn the Speed Master Off Road Car (6) over so that you can gain access to the underside of the
vehicle.
●
Making sure that the Power switch (5) is in the OFF position, remove the screw (7) and remove
the battery compartment cover.
●
Insert 5 AA batteries (supplied) into the battery compartment observing the correct pollarity as
indicated.
●
Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the Speed Master Off Road Car is not going to be used for a
long time.)
1.4 Remote Battery Installation
●
The battery compartment is located on the
bottom of the pistol grip controller.
●
Push down and slide the battery compartment
cover (9) in the direction indicated to remove it
from the controller.
●
Insert 2 AA batteries (supplied)(10) into the
battery compartment observing the correct
polarity as shown.
WARNING
Do not mix old and new batteries.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in a fire.
Remove the batteries if the Speed Master Off Road
Car is not going to be used for a long time.
4
