If more than one Ingenious machines product is being built and used at one time, for
example two of the cars are built to race each other, then you will need to adjust the
channels on one of the remote controls, otherwise one control will control both built
machines. These simple instructions show you how to adjust the channel on one of the
controllers.
1. Press Key and at the same time press the Key.
2. Release the Key and press the Key again.
3. Choose the channel number by pressing the key to cycle through the channel
number, then press the Key. The Light will flash 3 times to show the channel has
been set successfully.
4
2.1 The Remote Control
2. USAGE INSTRUCTIONS
2.2 Setting Controller Channel
2.3 Connecting The Motor
1. Insert 4x AAA Batteries (Included).
2. Connect the right motor to the
batteries.
3. Connect the left motor to the
batteries.
Note: If more than one set of Ingenious
Machines are being used, set different
channels on each remote.
CHANNEL NUMBER (1-8)
CONFIRM CHANNEL NUMBER.
WHEN THE CHANNEL IS SET CORRECTLY
THE
LIGHT WILL FLASH 3 TIMES.
CHANGE CHANNEL
BUTTON
TURN LEFT /
RIGHT BUTTON
FORWARD /
BACKWARD
BUTTON
SET CHANNEL
BUTTON
SPECIAL FUNCTION KEY
