7
Resetting the Dinosaur:
1. Carefully push the arms back into the sides of the Dinosaur.
2.
Either press the button on the side of the Dinosaurs head or switch the on/off switch to
‘off’ and back to ‘ON’ to reset the position of the dinosaur and its legs.
Please Note:
Do not forcibly pull or push the Dinosaurs legs into position as this will break
the legs. Press the button on the side of the dinosaurs head to reset.
3. The dinosaur is ready to go again.
Try Me Function:
When the ‘ON’/’OFF’ switch is moved to Try Me the dinosaur will make a noise, its eyes and
mouth will light and spray water (if there is water in the water tank).
The dinosaur will not walk and will not react to being shot with the Dino Gun.
Standby Mode:
To save battery power, if the on/off switch is left to ‘on’ and the dinosaur is not shot by the
Dino Gun the dinosaur will automatically enter sleep mode.
To activate the dinosaur press the button on the side of the dinosaurs head to restart.
2.5 FAQ
Question
Possible Reason
Solution
The mouth lights up blue
but does not spray water.
1.
No water in the water
tank.
2.
Too much water in the
water tank.
3.
The atomizer in the
mouth has large water
droplets on.
1.
Add water to the water
tank.
2.
Reduce the water in the
water tank.
3.
Use a paper towel to
suck up the water drop-
lets on the atomizer.
•
Not enough power to
function.
•
Replace the batteries in
the Dinosaur.
The ‘Arm Dropping’ and
‘Falling Down’ functions
do not work.
•
The Dino Gun is not
aimed at the correct
part.
•
Aim the Dino Gun at
the sensor at the front
of the dinosaurs head.
•
The Dino Gun has low
batteries.
•
Replace the batteries in
the Dino Gun.
•
The dinosaur has low
batteries.
•
Replace the batteries in
the Dinosaur.
