25
body of the cooker hood at this stage.
7)
Lift the main body of the cooker hood onto
the angle bar and then fix it into position
using the 16 x M4 bolts.
o
IMPORTANT: This stage of the
installation process MUST be completed
by two people.
o
IMPORTANT: The 16 x M4 bolts
MUST be securely tightened.
8)
If you are going to be using the hood in
extraction mode, you should fix the ducting
hose to the spigot.
o
The electrical connection must
correspond to the electrical requirement
noted on the rating plate, which is placed
inside the cooker hood. The appliance should
now be connected to the electrical supply.
See page 15 for detailed information on the
electrical connection.
o
Check that the appliance is operating
correctly by selecting each speed and switching the light bulbs
on and off.
o
Remove the hanging hook and then slide the lower chimney
section downwards, until it rests against the main body of the
cooker hood.
o
Use a stainless steel cleaner and polish on the stainless steel
sections of the appliance.
o
If you are using the appliance in recirculation mode, then you
should now fit the carbon filter. See the “Fitting the carbon filter”
section on pages 13 - 14.