29
7) Lift the main body of the cooker hood onto
the angle bar and then fix it into position using
the 16 x M4 bolts.
o
IMPORTANT: This stage of the
installation process MUST be
completed by two people.
o IMPORTANT: The 16 x M4 bolts MUST
be securely tightened.
8) If you are going to be using the hood in
extraction mode, you should fix the ducting
hose to the spigot.
o
The electrical connection must
correspond to the electrical requirement
noted on the rating plate, which is
placed inside the cooker hood. The
appliance should now be connected to
the electrical supply. See page 15 for
detailed information on the electrical
connection.
o
Check that the appliance is operating correctly by selecting each
speed and switching the light bulbs on and off.
o
Remove the hanging hook and then slide the lower chimney
section downwards, until it rests against the main body of the
cooker hood.
o
Use a stainless steel cleaner and polish on the stainless steel
sections of the appliance.
o
If you are using the appliance in recirculation mode, then you
should now fit the carbon filter. See the “Fitting the carbon filter”
section on pages 13 - 14.
Summary of Contents for BAH60
Page 27: ...26...
