Figure 6 Area to be scanned
5. If the scan is successful the android app will be able to register your logger to your profile. Note that
you can register once logger to only once. If you want to register the device to another profile please
6. Once the device is registered you can continue with the initial configuration.
8.2 Network coverage and service
In order to work ThingsLog data loggers need network connection. Prior performing the initial
configuration ensure that there is NB IoT network coverage in your area. If you are not sure which network
operator has been used with your ThingsLog device please contact us at
.
8.3 Initial configuration ThingsLog LPMDL-1102
1. Connect your logger to your meters and sensors as described in section physical installation.
2. Navigate to meny “All Devices” - and pick your newly added logger.
Visit us at
www.thingslog.com
