Sargas User Guide
6
Sargas User Guide
Introduction
This document applies to Sargas readers with firmware version 5.1.2 or later.
This document explains how to set up the Sargas readers, how to configure them for
network operation, and how to use the browser-based interface. See the corresponding
Sargas Firmware Release Notes
for operational differences that what is in this User
Guide specific to a firmware version.
Separate appendices contain specifications and antenna information that are specific to
the Sargas reader.
Applications to control the Sargas from an external host can be written using the high level
MercuryAPI. The MercuryAPI supports Java, .NET and C programming environments.
Applications to control the Sargas using its internal processor can be written via the C
programming environment. The MercuryAPI Software Development Kit (SDK) contains
sample applications and source code to help developers get started demoing and
developing functionality. For more information on the MercuryAPI see the
MercuryAPI
Programmers Guide
and the
MercuryAPI SDK
, available on the ThingMagic website.
This document is broken down into the following sections:
Hardware Overview
- Provides detailed specifications of the Sargas hardware and
physical interfaces.
