THSEU101 User Manual
Rev. 1.00
www.thinesolutions.com |© THine Solutions, Inc. All rights reserved | Page 10 / 36
Features
Generic camera connector
V-by-One® HS Vision System Starter Kit utilizes camera adapter boards for interfacing to specific camera modules. V-by-
One® HS Vision System Starter Kit is supplied with
VSSK Camera. The generic camera connector is implemented with
Samtec
QTH-030-02-L-D-A. Refer to schematics for pinout and other details.
THCV241A-B bi-directional transceiver
THCV241A is designed to support 1080p60 2Mpixel uncompressed video data over 15m 100 Ohm differential STP or
single-end 50 Ohm Coaxial cable with 4 in-line connectors between camera and processor via V-by-One® HS.
THCV241A supports a MIPI CSI-2. Each CSI-2 data lane can transmit up to 1.2Gbps/lane. Virtual channel is supported.
One high-speed V-by-One® HS lane can transmit up to 1080p60fps. The maximum serial data rate is 4Gbps/lane. 2nd
output lane supports HDR large amount of data or data copy-and-distribution experience.
Power solution
The camera board can be powered from an external source or from the board-to-board connector. Powering from the
board-to-board connector requires the use of a connector board that supports power over V-by-One® HS or proper cable
connection in the case of the SMA connector board. When powering the camera board externally via the optional
auxiliary power input, connect a 5V adapter via the micro USB connector.
When power is applied to the board from either external adapter or from the board-to-board connector, the LED, D902,
labeled Power Good will be illuminated. When power is present from the board-to-board connector, the LED, D907,
labeled POC (Power-Over-Cable) will also be illuminated.