THEVA215-V2_216-V2_UsersGuide_Rev1.20_E
3/13
Copyright(C)
2019 THine Electronics, Inc.
THine Electronics, Inc.
Security E
THEVA216-V2
W1: Connect the 3.3V power supply with pin#29 and 30 of CON2.
W2: Connect the 3.3V power supply with pin#1 and 2 of CON3.
Figure 5 THEVA216-V2 Power Supply from / to Each Connector
5. V-by-One
®
HS Input / Output Connector Select
V-by-One
®
HS input / output connector can be selected by using 0ohm resistors.
(1)
1mm Pitch Connector (Default Setting)
Mount / unmount following 0ohm resistors to use 1mm pitch connector.
Table 2
Mount
Unmount
THEVA215-V2
R7, R8, R9, R10, R11, R12
R23, R25, R26, R31, R33, R34
THEVA216-V2
R12, R13, R14, R15, R16, R17
R25, R26, R27, R29, R30, R31
(a)THEVA215-V2 (Top side)
(b)THEVA216-V2 (Top side)
Figure 6 Resistor Mounting for 1mm Pitch Connector
W1
W2
V-by-One
®
HS output
HTPDN/LOCKN input
TX0
TX1
V-by-One
®
HS input
HTPDN/LOCKN output
RX0
RX1
