EN
12
Accessories Installation & Instruction
1.Install the Rear Camera (Need to be purchased)
The installation location of rear camera is actually quite flexible, so there some
recommended locations with different angles of visions.
A
B
A: Install on the rear windshield.
B: Install above the license plate.
Connect the red wire to the reverse light
Please identify the wire that feeding the reverse light from rear light cluster, although
its placement may vary, make sure to refer to your car’s manual. Once spotted, use
a pair of pliers or wire strippers to peel the rubber to expose the live wire.For safety,
make sure you do this while the car is turned off. Tie the red trigger wire with the
positive terminal of the correct wire and then wrap it with electrical tape.
* Do not connect the red trigger wire to brake light of tail light.
* When on reverse gear, it will make the dash camera’s screen automatically change
to the rear view in order to view the reversing situation.
